Summary
50W x 4 + 300W (4Ω)
75W x 4 + 500W (2Ω)
150W x 2 (Bridged) + 300W (4Ω)
* Conformal Coating: Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Overview
CEA-2006 Primary Ratings |
Power Output | 50 Watts RMS x 4 + 300 Watts RMS x 1 at 4 Ohms and ≤1%THD+N |
---|---|---|
Signal-to-Noise Ratio | 80dBA (Reference: 1Watt into 4Ohms) | |
Maximum Power Output |
MAX POWER | 1600W |
Rated Power Output at 14.4V |
A/B (4 Ohms) | 50Watts RMS x 4 (4 Ohms, 20-20kHz, ≤1.0% THD) |
A/B (2 Ohms) | 75Watts RMS x 4 (2 Ohms, 1kHz, ≤1.0% THD) | |
SUB (4 Ohms) | 300Watts RMS x 1 (4 Ohms, 20-200Hz, ≤0.5% THD) | |
SUB (2 Ohms) | 500Watts RMS x 1 (2 Ohms, 100Hz, ≤0.5% THD) | |
A/B (Bridged 4Ohms) | 150Watts RMS x 2 (Bridged 4 Ohms, 1kHz, ≤1.0% THD) | |
Specifications |
Signal to Noise Ratio | 100dB (Reference: Rated Power into 4Ohms at 14.4V) |
Frequency Response | 20Hz-50kHz (+0dB, -3dB) A/B 20Hz-200Hz (+0dB, -3dB) SUB |
|
Input Impedance | 10k ohm | |
Speaker Impedance | 4Ω (2Ω to 8Ω allowable) | |
Bridged Connection | 4Ω to 8Ω allowable | |
Audio Section |
Low-Pass Filter | 50Hz-200Hz, -24dB/oct (SUB) |
High-Pass Filter | 50Hz-200Hz, -12dB/oct (A/B) | |
Bass Boost | 40Hz, 0dB - +18dB (SUB) | |
RCA Input Sensitivity | 0.2[V] - 5.0 [V] | |
Speaker Level Input Sensitivity | 4.0[V] - 12.0 [V] | |
Terminals |
Battery & Ground | M6 Screw Type Terminal Block |
Speaker Output | M4 Screw Type Terminal Block | |
General |
Dimensions(WxHxD) | 9 x 2-3/16 x 7-3/8 [inch] |
Operating Voltage | 14.4V(11-16V allowable) | |
Current Consumption | 58[A] | |
Key Features |
CEA-2006 Compliant 2 Ohms Load Capability Speaker Level Input with Signal Sensing Turn-on Power MOS-FET Switching Power Supply Extruded Aluminum Heat Sink Design A B Sub Independent Gain Adjustment |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.